View Single Post
  #3  
Old 03-13-2020, 11:00 PM
noseoil noseoil is offline
Member
 
Join Date: Dec 2019
Posts: 25
The frame is all 1/16" wall, I added another 1 1/2" X 1 1/2" center piece so, the two 1x1's take the bolts & the center rail takes up the load as well. Has a top in place now, so it should be plenty strong. The machine weighs 250#, so each member will carry 83#, split 2 ways (functionally, load at each end) means each weld on the base will take 41.5# at the ends, or enough to take the load.

Will post back once it's in place & bolted down.
Reply With Quote