MEMBER ITEMS FOR SALE
Custom Knives | Other Knives | General Items
-------------------------------------------
New Posts | New PhotosAll Photos



Go Back   The Knife Network Forums : Knife Making Discussions > Custom Knife Discussion Boards > The Display Case

The Display Case A place to post your latest knives and creations. Let the Knife Network community see your work first!

Reply
 
Thread Tools Display Modes
  #1  
Old 01-14-2018, 10:31 AM
DamascusFreek DamascusFreek is offline
Member
 
Join Date: Jan 2018
Location: Tucson, Arizona
Posts: 10
My first 3 Damascus knives

Hi, I'm new to the forum, and to knife making. This is my first post. Thought I would post a pic of the first 3 Damascus knives I made. These are the 4'th and 5'th knives I have ever made. The two matching knives I made for my parents, and they are made from 1084,1095, and 15N20. They are 64 layers with some raindrop pattern in them. The other knife is 1095, and 15N20, and is only 24 layers. Handles are Cocobolo. The handles on the two matching knives have a partially hidden guard that I came up with as a way to fix a mistake I made. I drilled the forward tang hole too close to the guard and it would have left less than 1/4" of wood if I butted the wood up against the guard. I was afraid that would crack over time, so I wrapped the wood around the guard by cutting it out in a mill. All together I have about 70 hours in the two matching knives. Those two knives were made from the same piece of steel, and the handle scales were all four cut from one piece of wood, then one scale from each pair was used on each knife so they are truly matching knives. I tried to make a cross pattern with the raindrop pattern, but didn't come out the way I planned, so they are hard to see. Hope you like them. Any constructive criticism is welcome as I am learning. I started making knives in September. Thanks for looking!

Last edited by DamascusFreek; 06-27-2018 at 12:49 AM.
Reply With Quote
Reply

Tags
1084, 1095, 15n20, a, cutting, damascus, first post, guard, handle scales, handles, hidden, knife, knife making, knives, made, make, making, mill, pattern, post, raindrop, scales, steel, tang, wood


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
My first three Damascus knives DamascusFreek The Display Case 4 02-21-2018 10:17 AM
Damascus knives j.tao The Display Case 2 02-01-2007 12:15 PM
John Greco Cable Damascus Knives Are Coming Soon! Tactical Knives Are Back!! GHNorfleet Knives For Sale - Custom 0 11-20-2005 08:32 PM
New forged Damascus knives David Peterson The Newbies Arena 2 12-17-2002 08:21 PM
Damascus Knives sspitza Knife Making Discussions 3 09-30-2001 12:51 AM


All times are GMT -5. The time now is 04:06 AM.




KNIFENETWORK.COM
Copyright © 2000
? CKK Industries, Inc. ? All Rights Reserved
Powered by ...

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
The Knife Network : All Rights Reserved