MEMBER ITEMS FOR SALE
Custom Knives | Other Knives | General Items
-------------------------------------------
New Posts | New PhotosAll Photos



Go Back   The Knife Network Forums : Knife Making Discussions > Custom Knife Discussion Boards > Knife Making Discussions > The Newbies Arena

The Newbies Arena Are you new to knife making? Here is all the help you will need.

Reply
 
Thread Tools Display Modes
  #1  
Old 12-10-2016, 02:51 PM
jimmontg jimmontg is offline
Guru
 
Join Date: Jan 2016
Location: Now live in Las Cruces NM.
Posts: 1,276
7cr17MoV; I searched for this steel and could't find a discussion of it here.

I have read that it is the equivalent of 440A, but I bought a filet knife to use as a pattern with some modifications and the thing is harder than my RC 58 scratcher and my RC 60 scratcher barely scratches it which means it is definitely in the 59 range. I was not aware this 7cr17MoV stainless steel was capable of getting that hard. It at best has .75 carbon and .1 % Vanadium, but this thing is hard and it is tough to bend flexible (1/16 thick), could the company that sold it have made a mistake? I was grinding the handle to a more ergonomic shape and also to make it fit my S30V material (1 inch wide) and I had to use my angle grinder cause it just wore out my discs on my 8" disc grinder. I used a silicone carbide disc too. I'm thinking it may be 9cr14MoV instead which is closer to 440C.

I bought the knife a few months ago on sale and they advertise it at RC 59 and I thought that was just exaggeration for the type of steel they said it was. I didn't buy it to make into a knife to sell, but I guess I will now. I whittled a piece of dymondwood with it and it didn't dull or roll over the edge. I don't bother with a brass rod test with stainless, but the edge on this knife went through a lot of dymondwood with no harm done.

I searched the Forum and couldn't find any discussion of this Chinese steel so I thought I'd throw it out there.

Last edited by jimmontg; 12-10-2016 at 03:03 PM.
Reply With Quote
  #2  
Old 12-10-2016, 03:06 PM
jimmontg jimmontg is offline
Guru
 
Join Date: Jan 2016
Location: Now live in Las Cruces NM.
Posts: 1,276
I found the exact same knife on another website and they said it was 440C so I guess I just answered my own question. Make that two different knifemaker websites TKS has it too and again it's 440C.

Last edited by jimmontg; 12-10-2016 at 03:31 PM.
Reply With Quote
Reply

Tags
440c, angle, blade, brass, carbon, edge, file, fishing knife, grinder, grinding, handle, knife, knife supply, made, make, material, pattern, rod, s30v, sell, stainless, stainless steel, steel, supply, throw


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Knife Steel Discussion Podcast zoldaman The Newbies Arena 1 11-30-2012 04:25 PM
Cant find any PG SS steel in stock Txcwboy The Newbies Arena 6 01-10-2009 11:31 AM
cant find steel. Brett Holmes The Folding Knife (& Switchblade) Forum 4 11-22-2007 06:28 AM
1095 warped. searched archive. rabbit_skinner The Newbies Arena 5 10-04-2003 07:15 PM
Where Can I Find 5/16" Steel Dana Acker The Outpost 14 04-16-2003 08:24 PM


All times are GMT -5. The time now is 11:33 AM.




KNIFENETWORK.COM
Copyright © 2000
? CKK Industries, Inc. ? All Rights Reserved
Powered by ...

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2020, Jelsoft Enterprises Ltd.
The Knife Network : All Rights Reserved