MEMBER ITEMS FOR SALE
Custom Knives | Other Knives | General Items
-------------------------------------------
New Posts | New PhotosAll Photos



Go Back   The Knife Network Forums : Knife Making Discussions > Custom Knife Discussion Boards > Knife Making Discussions > Fine Embellishment

Fine Embellishment Everything from hand engraving and scrimshaw to filework and carving. The fine art end of the knifemaker's craft.

Reply
 
Thread Tools Display Modes
  #1  
Old 07-13-2005, 08:12 PM
mgdesigns's Avatar
mgdesigns mgdesigns is offline
Steel Addict
 
Join Date: Sep 2004
Location: Franklin, TN
Posts: 146
Where to get 24K gold wire for inlays?

Hey Forum:

I am a full time jeweler, and I've recently started to try inlaying gold into some practice plates. I started by using some homemade 14KY (annealed) wires, but the get such a temper to them so quickly, I'd like to try 24K. Now I am having a harder than expected time trying to get 24K gold wires for inlays. I normally use Stuller out of Lafayette, LA for all of my general small quantities of stock, but today they did not have 24K x 24 ga. wire on hand. It's the first time I've ever ordered pure gold wire, so I was amazed that they did not have it in stock. I also checked on-line with Hoover & Strong (hooverandstrong.com), and it seems you have to order a huge amount to get them to ship out.

Who can offer some assistance for this? Should I also get a selection of 18K various colors, and 22KY for variations in colors?

Thanks ahead of time for any suggestions.

Sincerely,

Mark in Nashville, TN
Reply With Quote
  #2  
Old 07-13-2005, 08:25 PM
MCirelli MCirelli is offline
Skilled
 
Join Date: Mar 2005
Location: Ellwod City, PA
Posts: 379
If you draw out your 14k why don't you draw out some 24k. If you have a ingot mold you can use 24k casting gain make an ingot and draw it out. 30ga and finer is a little tough because its so fine and soft its hard to grip without crushing. You may want to try United Precious Metals in New York. I can give you the number send me an Email.
Mike Cirelli

Last edited by MCirelli; 07-13-2005 at 10:56 PM.
Reply With Quote
  #3  
Old 07-13-2005, 10:18 PM
Darren's Avatar
Darren Darren is offline
Skilled
 
Join Date: Jul 2002
Location: Billings, Montana
Posts: 628
Hey Mark.
If what you are wanting to do is practice, I would suggest using copper wire. when annealed it acts just like 24k yellow and is available for nothing. just pull it out of some electrical and speaker wires.

I normally get my 24k wire from Rio Grande, they my not be the cheapest but they will turn it around real quick for you.
Lets see some of your inlay results.


__________________

DarrenP.Reeves
Custom Hand Engraving
Billings, Montana

1-406-245-3444

Knife in Avatar
Dream as if you'll live forever. Live as if you'll die today.
Reply With Quote
  #4  
Old 07-14-2005, 12:17 AM
Tim Adlam's Avatar
Tim Adlam Tim Adlam is offline
Registered
 
Join Date: Jun 2002
Location: Oshkosh, WI USA
Posts: 1,486
Mark,

You're handicapping yourself by working with the lower karat gold.
For practice, I'd go with Darren's suggestion on copper wire.
With gold, stay with 24 or 22 k. and order it "dead soft"

I order from Hoover & Strong, and yes they have a 5 foot min. order, but you'd be surprised how fast that gets used up.
From what I know, H&S is the source for all of the other suppliers.
The nice thing is that you can combine different gauges to fit that quota.
For me, ordering different sizes saves time rather than drawing down wire.
Should I need an in-between size, then I go to the drawplate.

I never bother with trying to figure out the cost/calculations.
Tell them what you want, and how you want it annealed.

My last order of 20ga, 22ga, and 24ga 5' gold wire, and 5' of fine silver wire
[which arrived this week] totaled $165., so it's not that expensive.
According to the invoice, 2 feet of 24ga dead soft 24kt gold wire cost $35.91 at present market price.

When you get to the point where you want to incorporate gold in your work,
I'd be happy to include your order with mine if you just need a small quantity of wire.

Tim
Reply With Quote
  #5  
Old 07-14-2005, 06:06 AM
rrrf68 rrrf68 is offline
Steel Addict
 
Join Date: Feb 2005
Location: Albany GA
Posts: 134
You will find that Ray Viramontez at 601 Sringfield road Albany, GA 31707 ((229)432-9683) email sgtvira@aol.com has wire from .011 to .0395 and sheet from 30 to 19 gauge. Ray is a real nice guy and one of the worlds finest gun engravers. Fred


__________________
Fred Marrinan
rrrf68@bellsouth.net
Reply With Quote
  #6  
Old 07-14-2005, 08:18 AM
ron p. nott ron p. nott is offline
Living Legend
 
Join Date: Jun 2002
Location: sunnerdale pa
Posts: 1,540
i must agree with fred i buy all of my 24k gold from ray i have been dealing with ray for years when i order i usually get 40 thousands round and 5 to 50 feet at a time .. ron


__________________
ron p. nott
Reply With Quote
  #7  
Old 08-10-2016, 01:18 AM
Chazbot Chazbot is offline
Member
 
Join Date: Aug 2016
Location: Arizona
Posts: 16
I know that this is an old thread, but here goes.

I am looking for a source for silver inlay wire. The few places I've found are either out of business or don't carry the right stuff.

I am a gross beginner and have absolutely no idea what I am doing other than I watched a few videos and made my tools. So any help you are willing to toss my way would be wonderful!

Thanks!
Reply With Quote
  #8  
Old 08-24-2016, 07:36 PM
Gary Mulkey's Avatar
Gary Mulkey Gary Mulkey is offline
Guru
 
Join Date: Jun 2002
Location: Branson, Mo
Posts: 1,129
www.riogrande.com

Gary


__________________
Gary
ABS,CKCA, ABKA,KGA
Reply With Quote
Reply

Tags
beginner, inlay, made, silver, tools, wax


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump


All times are GMT -5. The time now is 09:38 PM.




KNIFENETWORK.COM
Copyright © 2000
? CKK Industries, Inc. ? All Rights Reserved
Powered by ...

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2020, Jelsoft Enterprises Ltd.
The Knife Network : All Rights Reserved