|
|
Register | All Photos | FAQ | Members List | Calendar | ShopStream (Radio/TV) | Search | Today's Posts | Mark Forums Read |
The Newbies Arena Are you new to knife making? Here is all the help you will need. |
|
Thread Tools | Display Modes |
#1
|
||||
|
||||
Cant find any PG SS steel in stock
I was looking for some ATS34 PG 1/8 inch and I cant find anyone that has it in stock.Well ok maybe I did find it somewhere but they wanted $60 for it when it sells for half that. I would even take 154 if its close in price to 34.MUST BE PG though and 1/8 x 1.5 prefered.
Any secret sources ? Dave |
#2
|
|||
|
|||
Texas knife shows to have ATS-34 (PG) 1/8" X 1 1/2 for 14.95 per foot.
Richard www.winelandknives.com |
#3
|
||||
|
||||
it says SOLD OUT
|
#4
|
|||
|
|||
Admiral looks to offer it - http://www.admiralsteel.com/pdf/bladesteel.pdf
looks to be around $18/ft |
#5
|
||||
|
||||
$16.33 shipping for 12" piece !!! YIKES.. I think its 12 for the steel and another 18 to PG it. So its 30 which is ok but the shipping is robbery !
|
#6
|
||||
|
||||
Sheffields Knife Supply usually has ATS-34 and 440-C in PG. Alpha Knife supply usually has 154CM and might have some in PG, if so, they'll probably have the best price ....
|
#7
|
||||
|
||||
Quote:
It's been a couple of years since I bought ATS-34 from Admiral, but from what I remember the shipping didn't go up that much if you bought several feet of it. So if you're going to have it shipped, and there's any chance you'll use it beyond just one or two projects, might as well buy more than just 12 inches. |
Tags |
knife |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
Thread Tools | |
Display Modes | |
|
|