The Damascus Forum The art and study of Damascus steel making. |
03-13-2007, 09:33 AM
|
Registered
|
|
Join Date: Mar 2007
Location: Au Sable River, MI
Posts: 1
|
|
Cleaning Damascus
Am new to the Board. Have a folding damascus pocket knife which has lost its color and definition. What can I use to clean it, and make the damascus "pop"?
Thanks.
|
03-13-2007, 10:21 AM
|
|
Founding Member / Moderator
|
|
Join Date: Jun 2002
Location: Wauconda, WA
Posts: 9,840
|
|
It doesn't sound like it needs cleaning, it sounds like it needs to be re-etched. That could be as simple as rubbing a little vinegar on it. That will bring out the pattern a little but it won't make it 'pop'. To do that, you'll need to learn how to prepare the steel using very fine sandpaper and degreasng it. Then, the blade is bathed in a ferric chloride solution, rinsed, dried.....maybe several times. To do this without the ferric chloride damaging the rest of the knife the blade should be removed from the knife first.
The Search key will help you find most of the literally hundreds of discussions of the various ways that we use to etch damascus ....
|
03-21-2007, 09:58 AM
|
|
Guru
|
|
Join Date: Jun 2002
Location: Katy, TX
Posts: 1,261
|
|
If it was a polished/smooth surface to begin with that was black/white, it may have been a pure nickel/carbon steel mix that was blued as opposed to etched, and the bluing has just rubbed off.
__________________
Don "Krag" Halter
|
03-21-2007, 02:08 PM
|
|
Skilled
|
|
Join Date: Nov 2005
Location: SW Oregon
Posts: 672
|
|
How about a pic so these guys are not guessing?
|
04-25-2007, 04:24 PM
|
Registered
|
|
Join Date: Apr 2007
Posts: 7
|
|
I am new to this forum and don't know if I am in the right place or not. I make knives from damascus blades from many sources. Occationally, i get a very small scratch, talking hairline yet bright, on the blade and was wondering how to cover it up without re-etching the whole thing. Is there any solution to this?
|
04-25-2007, 07:08 PM
|
|
Founding Member / Moderator
|
|
Join Date: Jun 2002
Location: Wauconda, WA
Posts: 9,840
|
|
Dave,
Maybe - just maybe - you can put some diluted ferric chloride on a Q-Tip and dab at the scratch. If the FC gets in there it may color it enough to hide it somewhat, depending on whether or not it can blend with the overall pattern. But, there is only one way to guarantee that the scratch is invisible and that is to sand it out and re-etch the blade. As a rule of thumb, etching will not hide scratches if anyone really looks at the blade ...
|
04-26-2007, 11:00 AM
|
Registered
|
|
Join Date: Apr 2007
Posts: 7
|
|
Thanks for the tip. I thought of that but was afraid to try it on a finished knife. This is a case where prevention is worth a pound of cure. I will try it but maybe not on a finished knife. I have an old blade to try it on. Thanks again, Dave
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT -5. The time now is 04:39 PM.
|